Danby DDW611W Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 43
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
12
Operating Instructions
STARTING A WASHING PROGRAM
WASH CYCLE TABLE
• ( * ) Means: Need to fill rinse in the Rinse-Aid Dispenser.
AHAM DW-1-2005 : This program is the test cycle, the rinse-aid
dispenser setting is recommended to Position 3.
Program
Cycle selection
Information
Cycle
sequence
Detergent
pre/main
Running
time(min)
Energy
(Kwh)
Water
(gal)
Rinse
Aid
For the heaviest soiled loads,
such as pots,pans,casserole
dishes and dishes that have
been sitting with dried food
on them for a while.
For normally soiled loads,
such as pots, plates,glasses
and lightly soiled pans.
standard daily cycle.
For lightly soiled loads,such
as plates,glasses,bowls and
lightly soiled pans.
A shorter wash for lightly soiled
loads that do not need drying.
To rinse dishes that you plan to
wash later that day.
Rinse
Rinse
Rinse
Main Wash
Rinse
Rinse
Rinse
Rinse
Rinse
Rinse
Main Wash
Rinse
Rinse
Rinse
Rinse
Main Wash
Rinse
Rinse
Rinse
Rinse
Main Wash
Rinse
Rinse
Rinse
Heavy
Normal
AHAM DW-1-2005
Light
Speed
Soak
3/15g
3/15g
3/15g
15g
/
112
85
77
45
10
0.424
0.361
0.311
0.233
0.01
4.7
3.8
3.4
3.3
0.7
*
*
*
TURNING ON THE
APPLIANCE
Starting a washcycle...
Draw out the basket(see the section entitled Loading the Dishwasher).
Pour in the detergent (see the section entitled Detergent and Rinse Aid).
Insert the plug into the socket. The power supply is 120V/60 Hz.
Make sure that the water supply is turned on to full pressure.
Close the door and press the on/off button to turn on the power supply.
Press the program button to select the program you need.
• Heavy->Normal->Light->Speed->Soak
Then press the Start/Reset button, the dishwasher starts.
NOTE: When you press the Start/Reset button to pause during washing,
the program light will stop blinking and the dishwasher will blink
every minute unless you press the Start/Reset button to start.
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 42 43

Comentarios a estos manuales

Sin comentarios